Digital Video

H.264/AVC and MPEG-2 HD/SD Encoder
HVE9110

H.264/AVC & MPEG-2 Two In One Encoder

product image

HVE9110 is H.264/AVC and MPEG-2 encoder which provides high quality and performance two outputs of H.264/AVC and MPEG-2 individually against one video source.

In addition, it supports One frame Super Low Latency at H.264/AVC encoding and the reliability is enhanced with the redundant power supply.

Carrier ID HVE9110 is Satellite Carrier ID Ready.

Key features

  • Supports H.264/AVC and MPEG-2 HDTV/SDTV Encoding
  • Low Latency Mode (Minimum Latency 1 Frame) (optional * 10 * 11 ) **
  • Compressed Audio for Super Low Latency (optional * 5 ) **
  • Multiple Video Format Compatibility including 1080i, 1080p, 720p, 576i, 480i, 1080p50 (optional * 3 ), 1080p59.94 (optional * 3 ), 1080p60 (optional * 3 )
  • Phase Aligned Audio
  • Embedded Audio Features up to 8ch/4PES
    • MPEG-1 LayerII: Stereo x 4
    • MPEG-2 AAC/MPEG-4 AAC/HE-AAC: 5.1+Stereo
    • Multiple Audio Format Support up to 8ch/4PES Combinations
  • Closed Caption: CEA-608, CEA-708, ARIB STD-B37
  • Ancillary Data Transmission Support : Time Code, SMPTE RDD11, SMPTE2038, ARIB TR-B22, TR-B23, OP-47
  • Supports Satellite Carrier ID
  • Seamless Protection Switching with MVD5000, HVD9130 combination (*Decoder optional)
  • Seamless Bit Rate Change **
  • TS Over IP Support with FEC
  • Supports DHCP
  • Easy Operation from Front Panel Display with Control Buttons as well as SNMP and WEB GUI via IP Network
  • Supports BISS-1/E (optional * 9 )
  • Quick Boot-up (23sec)
  • Redundant Power Supply
  • RoHS Compliant

* Please refer to the option table. ▼

** Encoding at H.264/AVC only

Front/Rear Panel

HVE9110 : Front panel

Front panel image

  1. Power switch 1
  2. Power switch 2
  3. Status LEDs
  1. Display panel
  2. Operation buttons

HVE9110 : Rear panel

Rear panel image

  1. ASI-OUT1
  2. ASI-OUT2
  3. SDI-IN1
  4. SDI-IN2
  5. SDI-OUT1
  6. SDI-OUT2
  7. ASI-IN
  1. EXT-CLK
  2. AES/EBU1
  3. AES/EBU2
  4. AES/EBU3
  5. AES/EBU4
  6. ANALOG AUDIO
    (optional)
  1. EIA-232C
  2. CTRL/DATA2
  3. ALARM
  4. DATA1
  5. AC inlet 2
  6. AC inlet 1

Specifications

Supported Standards

System ISO/IEC13818-1 (MPEG-2 SYSTEM TRANSPORT STREAM)
Video ITU-T H.264 | ISO/IEC 14496-10 AVC
ISO/IEC13818-2 (MPEG-2 VIDEO)
Audio ISO/IEC11172-3 (MPEG-1 AUDIO Layer Ⅱ)
ISO/IEC13818-7 (MPEG-2 AAC) LC Profile
ISO/IEC14496-3 subpart 4 (MPEG-4 AAC) LC Profile * 4
ISO/IEC14496-3 Amendment 1 (MPEG-4 HE-AAC v1) * 4
ISO/IEC14496-5:2001 Amendment 24:2009 (MPEG-4 AAC-ELD) * 5
SMPTE302M-2002

Video Specifications

Video Format
(H.264)
1080I (1920/1440/1280/960x1080) @25Hz, 29.97Hz, 30Hz: SMPTE274M
1080P (1920/1440/1280/960x1080) @23.98Hz, 24Hz: SMPTE274M * 2
1080P (1920/1440/1280/960x1080) @29.97Hz, 30Hz: SMPTE274M * 3
1080P (1920/1440/1280/960x1080) @50Hz, 59.94Hz, 60Hz: SMPTE274M * 3 *4:2:0 only
720P (1280x720) @50Hz, 59.94Hz, 60Hz: SMPTE296M
480I (720/352x480) @29.97Hz: SMPTE125M
576I (720/352x576) @25Hz: ITU-R BT.656-4
Video Format
(MPEG-2)
1080I (1920/1440x1080) @25Hz, 29.97Hz, 30Hz: SMPTE274M
1080P (1920/1440x1080) @23.98Hz, 24Hz: SMPTE274M * 2
720P (1280x720) @50Hz, 59.94Hz, 60Hz: SMPTE296M
480I (720/352x480) @29.97Hz: SMPTE125M
576I (720/352x576) @25Hz: ITU-R BT.656-4
512I (720/352x480) @29.97Hz: SMPTE125M
Profile/Level H.264/AVC Profile : Main, High, High4:2:2 (8bit)
Level : 4.2/4.1/4.0/3.2/3.0
Entropy : CABAC/CAVLC
MPEG-2 MP@HL, 422P@HL, MP@ML, 422P@ML
Video Input SMPTE424M/SMPTE292M/SMPTE259M BNC x 2 lines (0.8Vp-p 75Ω)
Video Through Output SMPTE424M/SMPTE292M/SMPTE259M BNC x 2 lines (0.8Vp-p 75Ω)
GOP Structure M=1 to 3, N=1 to 30

Audio Specifications

Audio Input AES/EBU (8ch) : BNC x 4 lines (1 Vp-p 75Ω)
Embedded Audio (SDI1 8ch) : SMPTE299M, SMPTE272M
Embedded Audio (SDI2 8ch) : SMPTE299M, SMPTE272M
Analog (4ch) : D-SUB 15Pin (20KΩ, balanced) * 1
Encoding Channels AES max. 8ch, Embedded max. 8ch, Analog max. 4ch * 1
(Selectable for each stereo)
Encoding Method MPEG-1 L2 (1ch(Mono), 2ch(DualMono), 2ch(Stereo)) max. 4PES
MPEG-2 BC (1ch(Mono), 2ch(DualMono), 2ch(Stereo)) max. 4PES
MPEG-2 AAC-LC (1ch(1/0), 2ch(1+1), 2ch(2/0), 4ch(4/0), 5.1ch(3/2/1), 6ch(6/0)) max. 2PES
MPEG-4 AAC-LC (2ch(2/0), 5.1ch(3/2/1)) max. 2PES * 4
MPEG-4 HE-AACv1 (2ch(2/0), 5.1ch(3/2/1)) max. 2PES * 4
MPEG-4 AAC-ELD (2ch(2/0), 4ch(3/1),5.1ch(3/2/1)) max. 2PES * 5
SMPTE302M (2, 4, 6, 8 ch) max. 4PES
Sampling Frequency 48kHz
Sampling Bit 16bit (MPEG-1, MPEG-2 BC, MPEG-2/4 AAC, MPEG-4 HE-AAC, MPEG-4 AAC-ELD, Dolby Digital), 16/20bit (SMPTE302M)
Bitrate 128/192 kbps (MPEG-1, MPEG-2 BC 1ch)
128/192/256/384 kbps (MPEG-1, MPEG-2 BC 2ch)
128/192 kbps (MPEG-2 AAC-LC 1ch)
128/192/256/320/384 kbps (MPEG-2/4 AAC-LC 2ch)
320/384/480/512/640 kbps (MPEG-2/4 AAC-LC 4ch, 5.1ch, 6ch)
64/96/128 kbps (MPEG-4 HE-AAC 2ch) * 4
128/192/256 kbps (MPEG-4 HE-AAC 5.1ch) * 4
128/192/256 kbps (MPEG-4 AAC-ELD 2ch) * 5
256/384/512/640 kbps (MPEG-4 AAC-ELD 4ch, 5.1ch) * 5
Pass Through Dolby E external encoder delay absorption function (0 to 2 frames)
Audio ch Control ARIB STD-B39 * 6

Ancillary Data

Data Type TIMECODE, SMPTE334M, SMPTE2038, ATSC A/72
ARIB TR-B22, ARIB TR-B23,ARIB STD-B37 * 7

Internal Test Signal

Video: Color Bar, Audio: 1kHz Sine wave

TS Specifications

Output Interface DVB-ASI : BNC x 2 lines (0.8Vp-p 75Ω)
IP * 8 100Base-TX/1000Base-T (RJ-45) x 2 lines (Category 5/5e/6)
RTP/UDP/IP (SMPTE2022-2-2007/RFC2250, RFC3550), FEC (SMPTE2022-1-2007/Pro-MPEG COP#3 R2 method)
External Clock Input Max. 160.000MHz (ARIB STD B-18 clock input compliant)
BNC x 1 line (0.8Vp-p 75Ω)
Stream Type TS (188/204byte : No Reed-Solomon)
Max. Multiplicity Video 1, Audio max. 8, Ancillary Data max. 3, Total 12
Maximum TS Rate 160.000Mbps (internal setting in 1 kbps units)

Control Specifications

Local Control FL display (20 digits x 2) + operator switches (6 buttons)
Remote Control LAN 100Base-TX/1000Base-T (RJ-45)
Maintenance I/O LAN 100Base-TX/1000Base-T (RJ-45) (joint use with remote control)
Alarm Output Buzzer (volume adjustable), relay contact outputs (2 NO/NC contacts)
External Reset System reset by relay contact input (1 NO contact)
Device Monitor Control SNMPv1, WEB Based GUI

Other

TS encoding BISS-1/E * 9
Dimensions (mm) 44(H) x 432(W) x 460(D) (w/o Connector, Foot, Rack mount bracket)
Weight (typical) 6kg
Power Source AC100V to 240V, 50/60Hz
Power Consumption 75W max.
Operating Environment 0 to 45℃ , 30 to 90% (condensation not allowed)
RoHS Compliant This product is RoHS compliant

Option Table (Hardware)

*1
HE9_OP_AnalogAudio
Conversion level:+4dBm to -18dBFS, Saturation level : +20dBm

Option Table (Software)

*2
HE9_OP_23P24P
1080P24, 1080P23.98
*3
HE9_OP_60P
1080P60, 1080P59.94, 1080P50, 1080P30, 1080P29.97
*4
HE9_OP_HEAAC
HE-AAC, MPEG-4 AAC
*5
HE9_OP_AACELD
MPEG-4 AAC-ELD
*6
HE9_OP_B39
ARIB STD B39
*7
HE9_OP_B37
ARIB STD B37
*8
HE9_OP_GIP
TS over IP output
*9
HE9_OP_BISS
BISS
*10
HE9_OP_ULDELAY
Ultra low Latency Mode (Minimum Latency 1 frame) H.264/AVC Only
*11
HE9_OP_SLDELAY
Super low Latency Mode (Minimum Latency 3 frames) H.264/AVC Only

Go to Key features 

Go to top of the Specifications 

Caution

Please use our products in accordance with the instructions provided in the manual, user's guide or specifications attached.

  • Dolby is a trademark of Dolby Laboratories.
  • Our company may change specifications and the appearance for improvement that are incidental to the product without providing prior notice. At the purchase and the use of the product, please confirm the latest information.
  • Exporting our products or technologies may be subject to the Foreign Exchange and Foreign Trade Law of Japan and export control acts and regulations of other related countries.

Products / Tech Info

Go to top of the page