NTT Electronics
Digital Video Business Group
Powered by goo Green Label
AVC/H.264 and MPEG-2 HDTV/SDTV Integrated Receiver Decoder (IRD)

HVD6100 New Products

HVD6100 professional 4:2:2 integrated receiver decoder (IRD)

HVD6100 is the world's first professional IRD that combines decoder functionality with support for AVC/H.264 HDTV, 4:2:2 chroma with a DVB-S2 demodulator.

The decoder function supports multi-format (AVC/H.264 and MPEG-2, 4:2:2/4:2:0 chroma and HDTV/SDTV) and comes equipped with a variety of features such as HDTV to SDTV down-conversion.

The demodulator function supports DVB-S2, DVB-DSNG and DVB-S formats for high-performance satellite transmissions. For its demodulation method, it supports 16APSK and 32APSK as well as QPSK and 8PSK, which are more efficient transmission formats that haven't been supported in IRDs before.

Inquiries about Codec System Solution
Download Data Sheet (PDF, 427KB)

Key features

  • Various features equipped as standard configuration
  • Support for both AVC/H.264 and MPEG-2
  • Support for 4:2:2 and 4:2:0 chroma
  • HDTV/SDTV support
  • Equipped with DVB-S2/DVB-DSNG/DVB-S demodulator
    • QPSK/8PSK and 16APSK(PS2-16A option), 32APSK(PS2-32A option)
  • Equipped with SARA DEC AVC/H.264 decoder LSI developed by NTT Electronics
  • High-quality video format conversion capability
    • HDTV to SDTV down-conversion
    • 1080i or 720p to 576i or 480i
  • Supports various audio formats and audio outputs (SDI Embedded/AES-3id/Analog)
  • Built-in Ethernet interface for IP communications with ProMPEG FEC
  • Low latency with AVC/H.264 HDTV/SDTV Encoder HVE9100 combination

Applications

Broadcast contribution and distribution

The use of HVE9100 AVC/H.264 HDTV/SDTV encoder with 4:2:2 chroma enables for high-quality video transmission with low latency.

Specifications


Features HVD6100 Premium Demodulator Model
Type HVD6100 PS2-32A
Type HVD6100 PS2-16A
Type HVD6100 PS2-8PS		 HVD6100 Standard Demodulator Model
Type HVD6100
Demodulator Part RF Demodulation Demodulation / Symbol Rate (Msps) DVB-S2 (EN310 210):
QPSK, 8PSK; 0.256 to 45Msps (Data rates < 1Msps require pilots) (32A,16A, 8PS)
16APSK; 0.256 to 45Msps (Data rates < 1Msps require pilots) (32A, 16A model)
32APSK; 1 to 33Msps (Normal Frames only) (32A model)		 DVB-S2 (EN310 210):
QPSK, 8PSK; 5 to 45Msps
DVB-S (EN300 421) / DVB-DSNG (EN301 210):
QPSK, 8PSK, 16QAM: 1 to 45Msps		 DVB-S (EN300 421):
QPSK: 5 to 45Msps
Coding and Modulation CCM(Constant) CCM (Constant)
Frame Length Short Frame: 16kbits
Normal Frame: 64kbits		 Normal Frame: 64kbits
FEC DVB-S2: 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DVB-S / DSNG: 1/2, 2/3, 3/4, 5/6, 7/8, 8/9 DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8, 8/9
Pilot tones Pilot tones detection for low data rates and LNB' switch a bad phase noise (in 8PSK or higher)
Input Frequency Range IF 950 - 2150MHz (L-Band)
Roll-off Factor DVB-S2: 0.20, 0.25, 0.35
DVB-S: 0.35, 0.25
Signal Level - 25 to - 65dBm
RF Input connector Dual 75ohm F (Female), Input selectable 75ohm F (Female) input x 1, throughout x 1
LNB Power and Control DC output: Off / 13V (Vertical) / 18V (Horizontal); Max Current: 300mA (PS2 model), 350mA (Standard)
Band Switching: Off / 22kHz
- LNB switching: DiSEqC 1.0
Decoder Part Input Stream Type Stream Type MPEG-2 TS (188 / 204bytes)
Input Interface DVB-ASI, IP, RF
Max. Input Rate HD: 160Mbps
SD: 50Mbps
De-Encryption None, BISS-0, BISS-1, BISS-E
IP Input Interface 100 / 1000Base-T (RJ-45),TS over IP Input
Format RTP / UDP, Unicast / Multicast, IGMPv2, IPv4
Maximum Bitrate 80Mbps, lower with ProMPEG
IP FEC ProMPEG (Cop3v2 Annex A)
Video Decode Output Format HD-SDI (SMPTE292M), SD-SDI (SMPTE259M); Selectable at 3 BNC (HD-SDI / SD-SDI / ASI) output
YPbPr / RGB (D-sub 15pin), CVBS (SD Composite NTSC / PAL)
Profile / Level MPEG-4 AVC / H.264 Video; Profile: High422(8bit), High, Main, Level: 4.0, 3.2, 3.1, 3.0
MPEG-2 Video; HD: MP@HL, 422P@HL; SD: MP@ML, 422P@ML
Video Format 1080i: 25 / 29.97 / 30 (SMPTE274M), 1920 x 1080,1440 x 1080
720p: 50 / 59.94 / 60 (SMPTE296M), 1280 x 720
576i: 25 (ITU-R BT.656-4), 720 x 576
480i: 29.97 (SMPTE125M), 720 x 480
Video Format Down Conversion Supported Format HD to SD (1080i 29.97 to 480i 29.97, 1080i 25 to 576i 25, 720p 50 to 576i 25, etc)
Down Conversion Panscan, Letterbox, Full Frame
Output Interface SD-SDI / HD-SDI, CVBS for monitoring
Audio Decode Output Interface SDI (Embedded Audio), AES-3id (BNC) x 4; Balanced Output (Analog 2ch + Digital 1ch) x 2
Decode Format MPEG-1 Audio Layer II: 1ch / 2ch (1 + 1, 2 / 0)
MPEG-2 AAC: 1ch / 2ch (1 + 1, 2 / 0) / 5.1ch surround & down-mix
SMPTE302M: 2ch / 4ch / 6ch / 8ch; Dolby-E Pass-through
(4 PES Maximum, Decoded output channels are limited up to 8ch when 5.1ch surround with other audios.)
Control Local Operation Power ON / OFF, Front Control Key
Remote Operation SNMP1.0, HTTP (Web GUI)
Body Dimensions / Weight 1U 19" Full-rack size, W430 x D465 x H45mm (W16.9" x D18.3" x H1.77" approx.), 8kg / 17.6lbs (approx.)
Power Source / Power Consumption AC 100 - 240V, 50Hz / 60Hz, Approx. 80W
Standard Accessories AC Power Cable x 1, Rackmount Bracket (L / R) x 1 set, Audio Breakout Cable (D-SUB 9 pin to Balanced Audio) x 2

Rear panel

1. EIA-232C   12. TS/IP IN
2. GENLOCK IN   13. MANAGEMENT
3. ASI IN   14. HD-SDI / SD-SDI / ASI x 3 Switchable
4. CVBS OUT   15. MONITOR OUT YPbPr/RGB
5. AUDIO OUT1   16. TUNER IN *
6. AUDIO OUT2   17. TUNER OUT *
7. ALARM   18. AC 100 - 240V IN
8. AES OUT1   19. TECHNICAL GROUND
9. AES OUT2   * HVD6100 - PS2 Input x 2
16. TUNER IN B
17. TUNER IN A
10. AES OUT3  
11. AES OUT4