Powered by goo Green Label

AVC/H.264 Full HD Stereoscopic 3D Contribution Encoder

XVE9300

XVE9300 | AVC/H.264 Full HD Stereoscopic 3D Contribution Encoder

XVE9300 is a Full-HD-3D transmittable AVC/H.264 Encoder which inherits its high image quality and performance from the HV9100 series. XVE9300 is able to fully synchronized transmission with left and right stereo images. Therefore, XVE9300 is capable of transmitting higher-quality 3D image compared with Side-by-Side format. In addition, even when 3D data transmission is not necessary, XVE9300 can be used to transfer two materials perfectly synchronized at different bit rates.

Inquiries about Codec System Solution Download Data Sheet

Key features

  • AVC/H.264 Full HD Stereoscopic 3D Contribution Encoder with built-in TS MUX
  • State-of-the-art performance of Award-winning HV9100 Series. (High4:2:2 Profile)
  • Guaranteed highest picture quality with more efficient compression than frame-compatible (Side-by-Side) format while maintaining Perfect Sync for both L and R channels
  • Multiple audio format support up to 4 x PES (16 channels)
  • Versatile multi-purpose operation:
    • Full HD Stereoscopic 3D encoding
    • Simultaneous Full HD Contribution encoding with different bit rate *1
  • TS Over IP Support with FEC (COP#3)
  • Easy operation from front panel display with control buttons as well as SNMP and WEB GUI via IP Network
  • Support BISS-1/E (option)
  • Planned Future expansion:
    • Dolby Digital *2 Pass-through
    • 480i(720 x 480)@29.97Hz: SMPTE125M
    • 576i(720 x 576)@25Hz: ITU-R BT.656-4
    • 1080/24p, 23.98p: SMPTE274M
    • 1080/60p(4:2:0): SMPTE425
    • Ancillary Data: ARIB TR-B22/B23, TIMECODE, SMPTE334M

*1 Both channels must be the same video format and frame synchronous.
*2 Dolby is a trademark of Dolby Laboratories.

Applications

  • Full HD Stereoscopic 3D Contribution
  • Simultaneous Full HD Contribution encoding with different bit rate

Specifications

Specification: XVE9300

Category Item Specification
Supported Standard System ISO/IEC13818-1 (MPEG-2 SYSTEM TRANSPORT STREAM)
Video ISO/IEC14496-10 (MPEG-4 AVC / H.264)
Audio ISO/IEC11172-3 (MPEG-1 AUDIO Layer II)
ISO/IEC13818-7 (MPEG-2 AAC) LC Profile
ISO/IEC14496-3 subpart 4 (MPEG-4 AAC) LC Profile *1
ISO/IEC14496-3 Amendment 1 (MPEG-4 HE-AAC v1) *1
SMPTE302M-2002
Video Specifications Video Format 1080I(1920/1440x1080) @25Hz, 29.97Hz, 30Hz : SMPTE274M
720P(1280x720) @50Hz, 59.94Hz, 60Hz : SMPTE296M
Profile and level Profile: Main, High, High4:2:2(8bit)
Level: 4.0/3.2/3.0 Entropy: CABAC / CAVLC
Video Input SMPTE292M BNC x 2 (0.8Vp-p 75Ω)
Video through output SMPTE292M BNC x 2 (0.8Vp-p 75Ω)
GOP Structure M=1 to 3, N=1 to 30
Test signal Color-bar movie signal
Audio Specifications Audio Input AES/EBU (8ch): BNCx4 (1Vp-p 75Ω)
Embedded Audio (SDI1 8ch): SMPTE299M
Embedded Audio (SDI2 8ch): SMPTE299M
Encoding channel AES Max 8ch, Embedded Max 8chx2, (Selectable by stereo pair)
Encoding method MPEG-1 L2 (1ch(Mono), 2ch(DualMono), 2ch(Stereo)) Up to 4PES
MPEG-2 BC (1ch(Mono), 2ch(DualMono), 2ch(Stereo)) Up to 4PES
MPEG-2 AAC-LC (1ch(1/0), 2ch(1+1), 2ch(2/0), 4ch(4/0), 5.1ch(3/2/1), 6ch(6/0)) Up to 2PES
MPEG-4 AAC-LC (2ch(2/0), 5.1ch(3/2/1)) Up to 2PES *1
MPEG-4 HE-AACv1 (2ch(2/0), 5.1ch(3/2/1)) Up to 2PES *1
SMPTE302M (2, 4, 6, 8 ch) Up to 2PES
Sampling frequency 48kHz
Sampling bits 16bit (MPEG-1, MPEG-2 BC, MPEG-2/4 AAC, MPEG-4 HE-AAC),
16/20bit (SMPTE302M)
Bit rate 128/192kbps (MPEG-1, MPEG-2 BC 1ch),
128/192/256/384 kbps (MPEG-1, MPEG-2 BC 2ch)
128/192kbps (MPEG-2 AAC-LC 1ch),
128/192/256/320/384 kbps (MPEG-2/4 AAC-LC 2 ch)
320/480/512/640 kbps (MPEG-2/4 AAC-LC 4ch, 5.1ch, 6ch)
64/96/128kbps (MPEG-4 HE-AAC 2ch) *1
128/192/256kbps (MPEG-4 HE-AAC 5.1ch) *1
Test signal 1kHz sine wave (-18/-20dBFS)
TS Specifications Output interface DVB-ASI: BNC x 2 (0.8Vp-p 75Ω) in one of the following configuration:
* Multiplexed AVC x 2 in one TS is assigned to BNC x 2
* AVC x 1 is assigned to BNC x 2
* AVC x 2 are assigned to BNC each
IP: 100BASE-TX/1000BASE-T (RJ-45) x 1 (Cat 5/5e/6)
RTP/UDP/IP(FRC1889), FEC(Pro-MPEG COP#3 R2)
* Supported FEC is 10 x 10 only
* No encription is supported.
* Supported TS Packet Type is TS only (not Advanced TS or TTS)
* 2 x TS can be output from IP I/F
External clock input Up to 160.0000MHz(Complient with ARIB STD B-18 Clock Input), BNC x 1(0.8Vp-p 75Ω)
Stream type TS(188/204 Bytes: No Reed-solomon coding)
Multiplicity AVC x 2 (Multiplexed TS):Video: 2, Audio: Max 4
AVC x 2 (Single TS x 2) Video: 1 per TS, Audio : Max 4 in total for both TS.
AVCx1: Video = 1, Audio: Max 4
Maximum TS rate 160.0000Mbps (Internally set in increments of 1kbps)
Control Specifications Local control Vacuum fluorescent display (20 positions x 2) + Operating switches (six buttons)
Rremote control LAN10BASE-T/100BASE-TX(RJ-45)
Maintenance I/O LAN10BASE-T/100BASE-TX(RJ-45)(Shared with Local Control)
Alarm output Buzzer tone (variable volume), relay contact output (two NO/NC contacts)
External reset System reset effected by a relay contact input (one NO contact)
Equipment supervisory control SNMP, WEB Based GUI
Others Encription BISS-1/E *1 (Only one TS can be encripted. Two streams must be muxed when 3D video is encripted.)
External dimension H43.6 x W432.4 x D500 (mm) Not including protrusion
Weight 6kg or less
Voltage AC100 to 240V(50/60Hz)
Power consumption 100W or less
Environmental conditions 0 to 45℃, 30 to 90% (No condensation)

*1 MPEG-2, MPEG-4 AAC-LC, MPEG-4 HE-AAC and BISS function is optional.