NTT Electronics to Exhibit New Products and Technologies at “IBC 2009”
September 4, 2009

NTT Electronics Corporation will jointly exhibit with Nippon Telegraph and Telephone Corporation (NTT) at “IBC 2009” (booth No. 1.D35). This is the largest show for the broadcasting market in Europe and is held from September 11th till the 15th in Amsterdam, Netherland.

NTT Electronics will exhibit new products such as AVC/H.264 and MPEG-2 4:2:2 Professional IRD “HVD6100”, Multi-Channel Encoder “MPC1010”, Multi-Channel Transcoder “HVT9400” and Encoder/Transcoder LSI “Matiz-Advance”.

The following products will be on display.

Real-time codec solutions

AVC/H.264 and MPEG-2 4:2:2 Professional IRD “HVD6100”

HVD6100 is the world's first professional IRD that combines decoder functionality with support for AVC/H.264 HDTV, 4:2:2 chroma with a DVB-S2 demodulator. The decoder function supports multi-format (AVC/H.264 and MPEG-2, 4:2:2/4:2:0 chroma and HDTV/SDTV) and comes equipped with a variety of features such as HDTV to SDTV down-conversion. The demodulator function supports DVB-S2, DVB-DSNG and DVB-S formats for high-performance satellite transmissions.

AVC/H.264 HDTV/SDTV Encoder/Decoder “HV9100 Series”

With an AVC/H.264 CODEC LSI chipset built-in that supports 4:2:2 Chroma, the HV9100 Series provides high-quality and low latency in a wide range of bit rate. It supports MPEG-2 format for smooth transition from existing MPEG-2 equipment to the up-and-coming AVC/H.264 format.

Multi-Channel Encoder “MPC1010”

The MPC1010 is a digital broadcast platform that can be installed with multiple MPEG-2 HDTV/SDTV encoders which allows for high image quality, high reliability and high cost performance. With an encoder IC that provides high-quality MPEG-2 videos, the unit supports both HDTV (1080i and 720p) and SDTV (576i and 480i) standards.

MPEG-2 to AVC/H.264 Multi-Channel Transcoder “HVT9400”

  • 4channel Input/Output MPEG-2 to AVC/H.264 Transcoder
  • Deterioration of Picture Quality is reduced by the Inheritance Coding and Preprocesing Technology
  • Audio Pass Through with Built In Lip-Sync Function
  • Supports DVB-ASI and Gigabit Ether IP Output

Devices for transfer equipment

H.264/AVC encoder/ transcoder LSI “Matiz-Advance”

Matiz-Advance is a single-chip encoder/transcoder LSI for professional use that performs real-time transcoding of high-quality video. Since Matiz-Advance's encoding control is compatible with CBR and VBR, as well as with the optional Capped VBR, it can be applied to a wide variety of video and audio equipment for professional use.

AVC/H.264 HDTV real-time codec LSI supporting PCI Express interface “PINEA”

PINEA is a single-chip solution that delivers high-quality video compression and playback while reducing the processing load on personal computers and networks. It supports H.264/AVC, a next-generation video compression format that provides twice the compression of MPEG-2.

Super-Compact Full High-Definition MPEG-2 Encoder Module “LibraENC Module”

Super-Compact MPEG-2 SDTV Encoder Module/Decoder Module “SD Module”

Latest Technology for the Next Generation

SVC Real-time Software Codec (technology exhibited by NTT Cyber Space Laboratories)

Scalable video coding (SVC) generates various types of SNR, spatial and temporal resolution images from a single coded stream. In order to adapt various network/display conditions in recent years, SVC has been standardized by ISO and ITU-T. NTT has been conducting advanced research on high-speed, efficient SVC coding algorithms. We can achieve the world's first software based codec system of SVC that can encode/decode Full-HD(1920x1080 pixels) images in real-time.

Exhibition Information

Exhibition
Name
IBC 2009 (International Broadcasting Convention)
Date
September 11-15, 2009
Venue
RAI International Exhibition Congress Center, Amsterdam, Netherlands
NTT Electronics
Booth No.
D35 (Hall 1)
 
Floorplan
IBC2009 NTT Electronics Booth location
NTT Electronics
Booth Image
IBC2009 NTT Electronics Booth Image

NTT Electronics Contacts

Digital Video Sales Division

News

Go to top of the page