HEVC and H.264/AVC 4K/HD/SD Encoder
HC10000E/HC11000E

Superior quality and performance, 4K/60p 4:2:2 HEVC Encoder

product image

Key features

  • Superior quality and performance using NTT Electronics' cutting edge LSI
  • Supports H.265/HEVC, H.264/MPEG-4 AVC
  • Encodes 4K Video Input for contribution OP
  • Supports Super Low Latency
  • Embedded Audio up to 16ch/8 PES combinations
  • Dolby Digital Pass-through
  • Provides the convenience of Ancillary Data transmission
  • Supports BISS-1/E OP
  • Supports HDR (for Contribution)
  • 12G-SDI Input OP
  • 3G-SDI, 12G-SDI Throughout OP (HC11000E)
  • AES/EBU Audio Input OP (HC11000E)
  • Supports simultaneous multiple IP Output as well as DVB-ASI
  • Multicast/Unicast of both IPv4 and IPv6 with FEC, ARQ
  • Provides robust "Seamless Protection of two Streams"
  • Two pairs of Ethernet ports for Management and TS over IP
  • Dual power supply for redundancy (HC11000E)

OP is option. Please refer to the option table.

Application

 application image

Front/Rear Panel

HC10000E (1RU Half) : Front panel

HC10000E image

HC11000E (1RU Full) : Front panel

HC11000E image

HC10000E (1RU Half) : Rear panel

Rear panel image

  1. 12G-SDI-IN OP7
  2. EXT-CLKOP9
  1. SDI-A
  2. SDI-C
  3. SDI-B
  4. SDI-D
  1. ASI1
  2. ASI2
  3. CTRL1
  4. CTRL2
  1. DATA1
  2. DATA2
  3. AC inlet

HC11000E (1RU Full) : Rear panel

Rear panel image

  1. EXT-CLK OP9
  2. SDI-A
  3. SDI-C
  4. SDI-B
  5. SDI-D
  1. ASI1
  2. ASI2
  3. CTRL1
  4. CTRL2
  1. DATA1
  2. DATA2
  3. Option Slot
Option Board

13 14 15 16 19 20 21 22 :
Digital Audio Input Board OP1

13 14 15 16 17 18 19 20 21 22 :
12G-SDI/AES Input Board OP8

  1. AES/EBU1
  2. AES/EBU3
  3. AES/EBU2
  4. AES/EBU4
  1. 12G-SDI-IN
  2. 12G-SDI-THRU
  3. SDI-A
  4. SDI-C
  5. SDI-B
  6. SDI-D
  1. AC inlet2
  2. AC inlet1

Specifications

Video

Input Interface BNC: 12G-SDI(SMPTE ST 2082-1)/3G-SDI(SMPTE ST 424)/HD-SDI(SMPTE ST 292)/SD-SDI(SMPTE ST 259)
Output Interface OP1 BNC: 3G-SDI(SMPTE ST 424)/HD-SDI(SMPTE ST 292)/SD-SDI(SMPTE ST 259)
Encode Method H.265/HEVC, H.264/MPEG-4 AVC
Profile ; Level

(Please see below for supported formats.)

H.265/HEVC Profile: Main 4:2:2 10, Main 10, Main ; Level: 5.1, 4.1, 4
H.264/MPEG-4 AVC OP3 Profile: High 4:2:2, High10, High, Main ; Level: 4.2, 4.1, 4.0, 3.2, 3.0
Video Format @ Frame Rate H.265/HEVC 2160P(3840x2160) @23.98Hz OP2, 29.97Hz OP2, 50Hz OP2, 59.94Hz OP2
1080P(1920/1440x1080)@23.98Hz, 29.97Hz, 50Hz, 59.94Hz
1080I(1920/1440x1080)@25Hz, 29.97Hz
720P(1280x720)@50Hz, 59.94Hz
576I(720x576)@25Hz ; 480I(720x480)@29.97Hz
H.264/MPEG-4 AVC OP3 1080P(1920/1440x1080)@23.98Hz, 29.97Hz, 50Hz, 59.94Hz
1080I(1920/1440x1080)@25Hz, 29.97Hz
720P(1280x720)@50Hz, 59.94Hz
576I(720x576)@25Hz ; 480I(720x480)@29.97Hz

Audio

Input Interface Embedded Audio 16ch(SMPTE ST 299, SMPTE ST 272), AES/EBU 8ch OP1
Encode Audio Type MPEG-1 L2 : 1ch(Mono), 2ch(Dual Mono), 2ch(Stereo); max. 8PES
MPEG-2 AAC-LC : 1ch(1/0), 2ch(1+1), 2ch(2/0), 4ch(3/1), 5.1ch(3/2/1), 6ch(2/2/2); max. 4PES
MPEG-4 AAC-LC : 2ch(2/0), 4ch(3/1), 5.1ch(3/2/1) ; max. 4PES
MPEG-4 HE-AACv1 : 2ch(2/0), 5.1ch(3/2/1) ; max. 2PES
MPEG-4 AAC-ELD : 2ch(2/0), 4ch(3/1), 5.1ch(3/2/1); max. 2PES
SMPTE ST 302 : 2, 4, 6, 8ch ; max. 4PES
Dolby Digital Pass Through; max. 6PES

Ancillary

Data Type TIMECODE, ARIB-TR-B22/B23, ARIB-STD B37 */B39 OP6, SMPTE ST 334 *, SMPTE2038, OP-47 *, CEA-708 *

Transport Stream(TS)

Output Type MPEG-2 TS(188/204byte); For IP: Time-stamped TS(TTS)(192byte), Advanced TS(192byte)
Maximum TS Rate 200.000Mbps
TS Encryption BISS-1/E OP5

Test Signal

Video : Color-bar signal
Audio : 1kHz sine wave (-18/-20 dBFS)

Network

Interface DATA1 : 100BASE-TX/1000BASE-T(RJ-45)
DATA2 : 100BASE-TX/1000BASE-T(RJ-45)
Transmission RTP/UDP/IP(SMPTE ST 2022-2:2007, RFC2250, RFC3550, RFC1889), Unicast/Multicast
Network Features IPv4 : IGMPv2/v3, NTP, DHCP, Ping, Syslog, PPPoE
IPv6 : MLDv2, Ping, Syslog, IPoE
Error Correction FEC(SMPTE ST 2022-1:2007/Pro-MPEG COP#3 R2), ARQ

Control

Local Control LCD (20digits x 4/brightness control available) + Front Switch (7 buttons)
Remote Control WEB GUI, SNMP v1, Ping, Syslog

Others

Dimensions
HC10000E :
W:209 x H:44 x D:430 (mm) (w/o Connector, Foot, Rack mount bracket)
HC11000E :
W:432 x H:44 x D:430 (mm) (w/o Connector, Foot, Rack mount bracket)
Weight HC10000E : 5kg typ.
HC11000E : 8kg typ. (w/o option card)
Supply Voltage AC100V to 240V, 50/60Hz
HC10000E : Single power supply
HC11000E : Dual power supply for redundancy
Power Consumption HC10000E : 100W max.
HC11000E : 150W max.
Operating Environment 0 to 45℃, 30 to 90% (non condensing)
Compliance RoHS, VCCI ClassA, FCC ClassA, EN55032 ClassA, EN61000-3-2, EN61000-3-3, EN55024, ICES

Option

  Suffix Option Name Description
Hardware OP1 HC11000_OP_AES Digital Audio Input Board (Factory Option)
OP7 HC10000E_OP_12G 12G-SDI Input (Factory Option)
OP8 HC11000E_OP_AES-12G 12G-SDI/AES Input Board (Factory Option)
OP9 HC1x000E_OP_EXTCLK External TS Clock Input (Factory Option)
Software OP2 HC1x000E_OP_4K 4K Encoding
OP3 HC1x000E_OP_AVC10 H.264/MPEG-4 AVC 10bit Encoding
OP4 HC1x000E_OP_ULDELAY Super Low Latency Mode
OP5 HC1x000E_OP_BISS BISS Encryption
OP6 HC1x000E_OP_B39 ARIB STD B39 (4K is not supported.)

* will be available in the future release. Please contact us for details.
This Specifications include paid optional features.

Go to Key features 

Go to Application 

Go to Front/Rear Panel 

Go to top of the Specifications 

Caution

Please use our products in accordance with the instructions provided in the manual, user's guide or specifications attached.

  • Dolby is a trademark of Dolby Laboratories.
  • Our company may change specifications and the appearance for improvement that are incidental to the product without providing prior notice. At the purchase and the use of the product, please confirm the latest information.
  • Exporting our products or technologies may be subject to the Foreign Exchange and Foreign Trade Law of Japan and export control acts and regulations of other related countries.

Go to top of the page